![](https://mbconveyors.com/wp-content/uploads/2021/06/MB_EV-800-1000_IMG_main_r02.jpg)
EV 800 - EV 1000
ELEVATORS
- Anodized ALU profile structure (thickness 15 Microns) Alloy 6060
- Standard configuration complete with:
– Polycarbonate tunnel to protect the elevator lane
– Elevator hopper with external structure in aluminium profiles, painted sheet metal sides and internal panels in AISI 304 2 mm thick stainless steel sheet
– Elevator unloading chute in aluminium complete with internal lining applied to the surface in contact with the product
– Padlockable switch/motor protector + cable and plug - Standard cut-proof, oil-proof belt with smooth green Polyurethane covering (ref. Pantone 320) and h 30 mm heat-welded slats at 150 mm pitch; vulcanized belt joint
- Temperature resistance: from -10 to +90°C
- Power: 0,12 kW
- Speed: 12 m/min fixed
- Voltage: 400 V / 50 Hz
- Std installation: on left-hand side so as to exercise a thrusting action, fixed drive with shaft-mounted flange
- Worm reduction gear with life-long lubrication
- Hopper in brushed AISI 304 stainless steel complete with Polycarbonate cover
- Food-grade white belt
- Unloading chute and side panels entirely made of AISI 304 stainless steel
Machine sizing sheets
STANDARD DIMENSIONAL FEATURES
![](https://mbconveyors.com/wp-content/uploads/2021/06/MB_EV-800-1000_DWG_car-std_ENG_r03.png)
CONFIGURATIONS
![](https://mbconveyors.com/wp-content/uploads/2018/08/EV600_CONFIGURAZIONI-1.png)
EV - DETAIL OF HOPPER COVERING
- The loading hopper in the photo alongside has a Polycarbonate cover. This is only installed as standard equipment on elevators for food products and pharmaceuticals. It is available as an optional on conventional conveyors
- The cover can be provided complete with hinges and/or gas springs to ensure it remains safely in any position
- The cover can be strengthened by a tubular aluminium frame (recommended when the hopper is very large – 1000/1200 mm)
![](https://mbconveyors.com/wp-content/uploads/2018/08/EV600_CONFIGURAZIONI-2.png)
EV - ACCESSORIES
- The photo alongside shows the level sensor complete with MB control panel
- The MB control panel installed in conjunction with the sensor has the following standard functions:
– When in the vertical position (see photo), the sensor signals that there is no product downline: the panel transmits a Start signal to the elevator
– In the horizontal position, the sensor signals to the panel that there is an abundance of product downline: the panel transmits a Stop signal to the elevator
– The Start and Stop signals are only transmitted to the MB control panel after the time required to ascertain the actual need
![](https://mbconveyors.com/wp-content/uploads/2018/08/EV600_CONFIGURAZIONI-3.png)
EV COMPLETE WITH PRODUCT HANDLER
- MB proposes the solution illustrated in the photo alongside when the product tends to create a “bridge” effect owing to its conformation
- The white section of the hopper has a pneumatic pusher which determines its vertical movement towards the product in the hopper, thereby preventing the “bridge” effect
![](https://mbconveyors.com/wp-content/uploads/2018/08/EV600_CONFIGURAZIONI-4.png)
EV - HOPPER WITH RAPID UNLOADING ACTION
- Detail of the rapid unloading device, which can be installed on the hopper as an optional
- The manually opened damper allows residues of product to be removed from the bottom of the hopper or samples to be taken for quality control purposes
![](https://mbconveyors.com/wp-content/uploads/2018/08/EV600_CONFIGURAZIONI-5.png)
EV COMPLETE WITH TWIN OUTFEEDS
- The photo alongside shows a twin outfeed installed on an elevator
- In this case, the twin outfeed is installed directly at the outlet of the standard chute supplied with the elevator
- The standard centre distances proposed between one outfeed track and the other are: L 600 or L 800 mm
![](https://mbconveyors.com/wp-content/uploads/2018/08/EV600_CONFIGURAZIONI-6.png)
EV WITH VERTICAL SECTION AND FLAT UPPER SECTION
- This photo illustrates a solution which can be proposed when there is not much room for the elevator
- The degree of functionality achieved by the elevator in this configuration depends on the type of product in question (the product must be examined before this solution can be proposed)
- The photo shows the funnel-shaped unloading chute that accurately channels the product inside the assembling unit
Category: Packaging